We match the machine interface and clamping style before recommending Eurostamp tooling.
Machinist's Vault + Sky High Fabrication
Upload your part. Find the right press brake tooling.
Get a tooling recommendation and an engineer-reviewed bending study for your part, material, angle and press brake.
Start a tooling study01Describe the bend
02Upload your CAD or print
03Sky High reviews the application
04Receive matched Eurostamp tooling
From part file to bend plan
See the bend before you commit to tooling.
Tell us what you are bending, the result you need, and the press brake you run. Your request becomes a Machinist's Vault CRM study for Sky High Fabrication to review.
The first recommendation can include a compatible punch and die set, bend assumptions, and a 3D study. Final tooling selection is confirmed by an engineer.
Calibrated animation example
Watch a 10 ga sheet progress to a 45 degree bend.
This single-bend motion study uses Eurostamp 1024 punch and 2088 die geometry. It demonstrates the requested bend progression before an engineer confirms the machine interface, tooling length, capacity, and application details.
- Punch
- Eurostamp 1024
- Die
- Eurostamp 2088
- Material
- 10 ga mild steel
- Target
- 45 degree included angle
Example study: the tooling closes progressively until the sheet reaches the requested 45 degree included angle.
Your tooling study is queued.
Sky High Fabrication will review the application. Machinist's Vault will contact you if any geometry or machine information is missing.
Reference:
What happens next
Recommendation first. Engineering approval before purchase.
Where the supplied geometry supports it, Sky High can prepare a 3D bend study and motion preview.
Machinist's Vault turns the approved selection into a quote, product recommendation, or custom-tool request.