Home Fibre discs Forvane Zirconia Alumina Fibre Discs — 5 in × 7/8 in
Forvane Zirconia Alumina Fibre Discs — 5 in × 7/8 in product image
FORVANE
Forvane fibre discs Zirconia alumina

Forvane Zirconia Alumina Fibre Discs — 5 in × 7/8 in

A high-performance zirconia alumina fibre disc for sustained cutting action, aggressive stock removal and demanding production grinding.

  • 5 in diameter × 7/8 in arbor
  • Maximum 12,200 RPM
  • For steel and stainless-steel production work
  • Use with a compatible fibre-disc backing pad
$23.99 Selected pack price
$2.39 per disc
SKU: 2Z715001-P10
Grit Choose the finish
Pack Size Bulk savings built in

Pack size is locked. Taxes and shipping are calculated at checkout.

Production packsLocked quantities from 10 to 1,000
Application supportHelp matching grit and profile
North American supplyBuilt for shop replenishment
5"Disc diameter
7/8"Arbor
12,200Maximum RPM
FIBRE Profile
Forvane industrial abrasives

Sustained cutting performance for demanding production work.

Forvane Zirconia Alumina fibre discs deliver high-pressure grinding performance for aggressive stock removal and sustained cutting performance on steel and stainless steel. The 5 in × 7/8 in format fits standard 7/8-inch arbor backing pads and is rated up to 12,200 RPM.

Choose the right grit

  • 16–24 grit: heavy stock removal and weld cleanup
  • 36–50 grit: grinding, edge work and surface leveling
  • 60–80 grit: controlled blending and preparation
  • 100–120 grit: finer finishing and coating preparation

Production-ready pack sizes

Select a locked pack of 10, 25, 50, 100, 500 or 1,000 discs. One cart unit equals one complete selected pack.

Specifications

  • 5 in × 7/8 in
  • Zirconia Alumina abrasive grain
  • Fibre backing
  • Maximum 12,200 RPM
  • For use with a compatible backing pad and guarded angle grinder

Always verify grinder speed and backing-pad compatibility. Wear appropriate eye, face, hearing and respiratory protection.

Grit selection

Choose the finish before the disc.

16–24

Heavy stock removal

For rapid material removal, heavy weld cleanup and aggressive grinding.

36–50

Weld grinding

For weld leveling, edge work and general fabrication cleanup.

60–80

Blending and preparation

For controlled scratch patterns and surface preparation before the next step.

100–120

Fine finishing

For lighter blending, cleanup and preparation before coating.

Abrasive guide

Aluminum oxide or zirconia alumina?

Aluminum oxide

Choose aluminum oxide for cost-effective general grinding, cleanup and surface preparation on common steels.

Zirconia alumina

Choose zirconia alumina for higher pressure, sustained cutting action and longer production runs on steel and stainless steel.

Product questions

Fibre discs, answered.

Do fibre discs require a backing pad?

Yes. Use a compatible backing pad sized for the disc and rated at or above the grinder speed. Confirm the 7/8-inch arbor fit before use.

Which grit should I choose?

Use 16–24 grit for heavy stock removal, 36–50 for weld grinding, 60–80 for blending and surface preparation, and 100–120 for finer finishing.

What is the difference between aluminum oxide and zirconia alumina?

Aluminum oxide is an economical general-purpose choice. Zirconia alumina is better suited to higher pressure and longer production runs where sustained cut rate matters.

How do bulk pack sizes work?

Choose a locked pack of 10, 25, 50, 100, 500 or 1,000. One selected pack is added to cart, preventing accidental non-standard quantities.